6.Separate circuit board from gauge assembly by pulling apart. (Figure
7) Caution: The circuit board contains sensitive electronic components.
Great care should be taken when handling the circuit board. Avoid touching
components on the circuit board directly and handle the circuit board by its
edges. Static shock could damage the circuit board. Avoid working in areas
that can create excessive static shock such as carpeted rooms.
Figure 7
Figure 8
7. Next, remove the eight screws from the front bezel.
8.Remove the gauge assembly from the white housing. (Figure 8) 9.Remove the two screws from the digital odometer. (Figure 9)
Figure 9
Figure 10
10.Attach the digital odometer to the
Autometer cluster by using the included spacers and head screws. (Figure 10) 11.Place the new cluster back into the
white housing. (Figure 11) Make sure to thread the odometer cable
through the housing hole and the new lamp connector through the top housing hole
before seating assembly completely into housing. (Figure 12)
